Installation

Safety information
Warning
Immediately stop using the product when an abnormality is found
Immediately stop using the product and pull out the power plug in the following cases:
When smoke or fire is detected.
When an abnormal sound or smell is detected.
When the product has been dropped.
When damage is found on the product exterior.
Do not remove the exterior parts of this product unless otherwise specified
There are parts which become very hot or have a high voltage applied inside the product. Do not remove the exterior parts fixed with screws. Failure to observe this may cause fire or electric shock.
Do not attempt to disassemble/modify this product
Do not attempt to disassemble/modify this product. Disassembly and modification of the product can cause fire or electric shock.
Do not insert any foreign objects into this product
Failure to observe this may cause fire or electric shock. Do not use the product where it may be exposed to splashing water. Do not place any containers with water on the product.
If water or a foreign object accidentally enters inside the product, immediately stop using the product, turn off the power, and then pull out the power cord and connection cable.
Do not install this product near a TV or radio
Failure to observe this may cause an uneven color on the TV screen or noise on the radio.
Install this product in a well-ventilated place
Secure space of 10 cm in every direction around the product for the product cooling to be fully functional. If the product is installed in a closed environment such as on a shelf, it may cause fire or damage the product.
Install this product in the correct direction
Install the product in the correct direction. If the product is installed upside down or laid sideways, it may cause fire and damage the product.
Be careful not to drop the product during transport
When transporting the product, be sure to hold the specified part and transport carefully. Dropping the product may damage the product or cause injury.
Do not block the exhaust port and the inlet port
If the exhaust and inlet ports are blocked by placing something near the exhaust or inlet ports, or by covering the product with a cloth, the temperature inside the product increases. Failure to observe this may cause fire, burns, or damage the product.
Protect this product from vibration and impact
This product is a precision device. Protect this product from vibration and impact. Failure to observe this may cause fire or damage of the product.
Do not damage the power cord
Failure to observe this may cause fire or electric shock.
Do not place a heavy object on the power cord.
Do not cut or pull the power cord.
Do not install in a location with high temperature or apply heat to the product.
Do not use the product with a different voltage
This product is designed for use only with 110V - 120V power supply. Do not use the product with a different voltage such as when used overseas. Failure to observe this may cause fire, electric shock, or damage to the product.
Use only the provided AC adaptor
Failure to observe this may cause fire, electric shock, or damage to the product. Do not use the provided AC adapter with other products.
Do not bundle the cables
Do not bundle the power cord and other cables, or wind them around anything. Failure to observe this may cause fire or electric shock.
Be careful when inserting and pulling out the power plug
If the power plug is incorrectly inserted or pulled out, it can cause electric shock.
Hold the plug part while inserting and pulling out the power plug.
Insert the power plug until it’s firmly connected.
Do not touch the power plug with wet hands.
Do not touch the power plug if there is thunder or lightning.
Do not use this product in a medical institution or near medical electronic devices
Do not use the product in a hospital or near medical electronic devices such as pacemakers. Radio waves generated from the product can affect the operation of medical electronic devices.
Do not look at the projector section and light source for a long time
Do not look the projection source for a long time.It may give bad influence to the eyes.
Do not cover the pod during image projection
If the pod is covered for a long time, the part where the projection light is seen will become hot and this may cause deterioration or deformation of the product, burns, or fire.
Caution
Remove the cords and cables when moving this product
When moving the product, be sure to turn off the power and remove the AC adapter, LAN cable, and other cords and cables. Failure to observe this may cause injuries or damage the product.
Turn off the power when removing the cords and cables
When inserting and removing the cords and cables such as LAN cables, be sure to turn off the power first and then do so. If they are removed while the power is on, the product may be damaged.
Insert the cords and cables until they’re firmly connected
Insert the cords and cables straight until they're firmly connected. Inserting them partially or at an angle may cause fire or damage the product.
Turn the power off when cleaning this product.
When cleaning this product, be sure to turn off the power first. Failure to observe this may cause injuries or damage the product.
Install this product where children cannot reach it
Failure to do so may cause unexpected incidents such as injuries from the product falling or a cable accidentally coiling around a child's neck.
Do not install this product in an unstable location
If the product is installed in an unstable location such as on an inclined or shaky location, it may result in injury or damage the product due to the product falling. Install the product on a flat surface with sufficient strength.
Do not place this product where it may be exposed to water
Do not place the product where it may be exposed to water such as near windows that may allow rain or snow to enter, or a bathroom. Failure to observe this may cause fire or electric shock, or damage to the product.
Do not install this product in the following locations
In addition, avoid installing in the following locations. Failure to observe this may cause fire or electric shock.
Locations subject to high temperatures such as near heating appliances.
Locations subject to direct sunlight.
Locations subject to high humidity.
Locations subject to dust.
Locations subject to smoke or steam.
Locations with many insects.
Avoid getting your fingers caught when cleaning the pod
Removing the front panel is necessary to clean the pod. When removing and attaching the front panel, pay extra attention and avoid getting your fingers caught.
Do not touch the periphery of the exhaust port
Do not touch it since the temperature of the exhaust port periphery is high. Failure to observe this may result in burns.
Stop using the product when condensation forms
Condensation may cause malfunctioning. Condensation can form in the following locations:
Locations subject to direct cold or hot wind such as in a room that has started to be heated.
Locations subject to high humidity or steam.
Stop using the product when condensation forms. Please wait for the water drops to disappear; then use the product.
Do not remove the power cord while the product is powered on
If the power cord is removed while the product is powered on, the product may be seriously damaged.
Package
After opening the Gatebox box, check if the package has all of the following items.
If a shortage is found, contact our customer service.
This product
AC adapter
CD-ROM for Gatebox
Operating instructions

*

The operating instructions are required when you ask for repairs. Safely keep the operating instructions; they will not be reissued. Re-issuance of the operating instructions is unavailable. We ask for your kind understanding.

*

Refer to "About license" for the CD-ROM provided with Gatebox.

When unpacking
Pass your hand through the rear (component unit) of the product as shown in the figure and slowly lift the product while supporting the bottom surface with your other hand. If another part is held and lifted, the product can be damaged.
When moving
Pass your hand through the rear (component unit) of the product as shown in the figure and slowly lift the product while supporting the bottom surface with your other hand.
Do not hold the part in gray in the figure on the right or apply strong force. It can damage the product or cause malfunctions.

Connect all cables

If you have an internet environment with wired LAN, insert the LAN cable to the modem or the router and insert another side to the Gatebox. Next, connect with the provided AC adapter and then insert the power plug to the inlet.
▲ PAGE TOP