Name of each part

Front view
Side view
Rear view

①Infrared ray receiver/transmitter section

Signals to control home electronics are received/transmitted.

②Status line

The status line lights up or turns off according to the status of the Gatebox main unit.

③Human detection sensor

This is used for the character to detect the existence of a user.

④Camera

This is used for the character to recognize the face of a user.

⑤Pod

Character appears inside the pod.

⑥Microphone

This is used to converse with the character.

*

If the audio has trouble recognizing the speech, talk closer to the microphone.

⑦Gate button

Touch when starting the voice recognition function, etc.

⑧Front panel

If the inside of the pod is dusty, remove this part and clean with a compressed air duster, etc.

⑨Outer pillar (Left) (Right)

Remove these when removing the front panel. Since the shapes of the left and right sides are different, be careful of the left/right/up/down directions when attaching.

⑩Maintenance panel (Left) (Right)

Remove these when removing the front panel.

⑪Heat exhaust port

This port is for cooling the inside of the product. To maintain the cooling efficiency, do not block this by placing something on the product or covering the product with a cloth.

⑫Component unit

When moving the product, be sure to hold this part.

⑬Inlet port

The cooling fan is installed to cool down the inside of the product. To maintain the cooling efficiency, do not block this by placing something in front of this or covering with a cloth.

⑭LAN terminal

Connect with a modem or router using an optional LAN cable to connect the Gatebox with a network.

⑮φ3.5 3-pole stereo headphone terminal

Connect an audio device with an optional audio cable to output the sound. Please note that the product is muted while connecting.
Only a 3-prong plug is compatible.

⑯Power button

Switch the power status between ON, OFF, and STANDBY.
[How to turn on the power]
Press the power button when the Gatebox power is off.
[How to turn off the power]
Hold down the power button for 10 seconds when the Gatebox power is on.
[How to enter sleep mode]
Press the power button when the Gatebox power is on.

⑰Power inlet

Connect with the provided AC adapter.

*

Disconnect the power plug only when the product is OFF.

▲ PAGE TOP