Setup

Install the dedicated application on your smartphone and configure the initial settings of the product. For the initial settings, a Google account is required. If you don’t have a Google account, obtain one in advance.

*

This product needs full-time connection and fixed size data communication. Recommend to do the setup with wired LAN.

*

Please tap [ACCEPT] when the location or notification permission dialog opens. This setting required for pairing and app push notification.

Attention
When the problem such as "error occurs" or "operation is not in progress" happens during the setup or normal operation, please try the following operations.

Hold down the power button to turn off the Gatebox, re-plug the power code and restart the Gatebox.

In addition, clear (task kill) and restart the application.

If the trouble seems out of order, sorry for the inconvenience, but please contact your trouble situation to our Customer Support.
Install the Gatebox Link
Install Gatebox Link on your smartphone.
For information on how to install, refer to your smartphone operating instructions.
Initial settings of the product
1
Turn on the product.
Press the power button on the rear of the product to turn on the power.
2
Launch Gatebox Link.
The terms of use and privacy policy screens will only be displayed when launched for the first time.
Please tap [ACCEPT] when the location or notification permission dialog opens. This setting required for pairing and app push notification.
Please carefully read the content on the screen and tap [NEXT] after you’ve agreed to the terms. (When [NEXT] is tapped, the user shall be deemed to have consented to the terms of use and privacy policy.)
You can not tap the [NEXT] until you read both the terms of use and privacy policy.
3
Sign in with Google Account.

*

Please note that the Google account used in settings is unchangeable.

Tap [OK] on the screen shown on the right and the Google account entry screen will be displayed. Enter your Google account to be linked.
When the entry is successfully completed, the message [Account link successfully completed. Return to the app and proceed to settings.] will be displayed. When you have confirmed the above message, tap [OK].
4
Pairing the app and Gatebox.
The pairing between the main unit and your smart phone will start.
When the preceding image has shown, touch the Gate button more than 1 second and follow the voice guidance.
When the pairing has been completed, the screen will automatically shift to the [NETWORK SETTING] screen.
Note
For the pairing between the main unit and your smart phone, the "Bluetooth method" and the "WebSocket method" are available. Select a connection method from them according to your usage environment.
5
Check the network connection.

*

This product needs full-time connection and fixed size

Check the wired/wireless network status of the main unit. When a network connection is available, the network name will be displayed in white and the [OK] button will become tappable.
To use with a wired LAN:
Insert a LAN cable and then tap the [OK] button.
To use with a wireless LAN:
Tap [Not connected with wireless LAN] and select a network (SSID) to connect; then enter the password. When the connection is established, the orresponding network (SSID) will be displayed in [Connected WLAN]. Tap the [Return] icon on the upper left of the screen and then tap the [OK] button on the [NETWORK SETTING] screen.
6
Adjust the display position (CALIBRATION).
After having checked the adjustment method, tap [OK].
On the adjustment screen, adjust to contact the bottom of the blue frame displayed on the product with the bottom of the inside of the pod in order to display an object at the center while checking the left (right) side of the blue frame and the right (left) side of the pod.
The display position can be adjusted by tapping the arrows (up/down/left/right). It may take some time until the app operation is applied to Gatebox. If the operation is not applied, try again after a brief pause.
After having completed the adjustment, tap [OK].
7
Register user information.
Register user information including your name and birthday.
After having completed all of the entries, tap [OK].
(The items entered for the user information can be edited later.)
8
Set schedule.
Set a week of Wake-Up time(MORNING), Leaving time(LEAVE), Bedtime(SLEEP) repeating settings in this section.
After having completed all of the entries, tap [SEND].
The initial settings are completed.
After checking the available update, the product will start up and the tutorial will start.

*

The application screen is under development. The actual screen may differ.

▲ PAGE TOP